Eastwind Diamond Abrasives Logo
"nothing can resist a diamond"
Cerium Disk: Manufactured by Eastwind™ Lapidary, Inc.

Cerium Oxide Resin Bonded Disks

Traditionally Cerium Oxide polishing was a messy process involving slurry and the cleanup and filtration issues related to slurry use. Eastwind Diamond Cerium Products eliminate the waste while providing a long lasting and durable solution to industrial and lapidary polishing. The cloth backing provides a stong, flexible base for the resin bonded cerium, while resisting heat deformation caused by the heat generated by the very aggressive cerium media.

  • Use wet
  • We use the highest concentration of the finest quality Cerium Oxide Compound to provide the most aggressive surface polishing area possible
  • Aggressive cutting and polishing results
  • Save precious rare earth material by eliminating wasteful slurry
  • Save time and materials with no cleanup and filtration
  • Our cloth backed Belts are durable and resist heat friction deformation and stretching

Cerium Oxide Disks are offered in the following standard diameter sizes:

  • 4 inch
  • 5 inch
  • 6 inch
  • 8 inch
  • 10 inch
  • 12 inch
  • 16 inch

We make disks from ¾" to 24". We offer this product with PSA (pressure sensitive adhesive), Velcro or Magnetic backings as a separate item. Disks are made with or without arbor holes, please specify.

Our resin bonded cerium products require a break in period before reaching maximum cutting/polishing speed. The break in time can be accelerated by using a fine dressing stick or the smooth edge of a hard glass - such as sapphire plate glass.

Please note that custom formulations are our specialty and we will work with you to address your particular needs based on your application.