Aluminum Oxide Dressing Sticks
Included with your first purchase of a Resin Bonded Product
Dressing Stick Instructions
We receive calls from customers stating that a product has lost all of its diamond coating and had them return the product only to discover that the product needed to be dressed. The way to eliminate the appearance of having lost coating is to dress the diamond product by running a piece of fine 220 mesh aluminum oxide (a dressing stick) over the surface for five to ten seconds. This effectively breaks down the vacuum and should eliminate the scratches. You simply run your belt or disk on the machine that you are using, apply plenty of water while doing it, and press an edge of the stick against the belt or disk for 5-10 seconds. The edge that you have pressed against the belt or disk will be worn down. Be sure to follow this procedure using lots of water to flush the disc or belt. The belt or disk should then give you great response to whatever application you are doing.
IF YOU HAVE ANY QUESTIONS OR CONCERNS ABOUT THE PERFORMANCE OF ANY OF OUR PRODUCTS PLEASE LET US KNOW.